![/!\](/wiki/modern/img/alert.png "/!\"){kind=small}
aun en construccion BR Esta es una guía para conectar un computador a vía LAN a un enrutador con FreiFunk y que sea posible verlo desde la red inalambrica.
Olsrd
Lo primero es instalar el cliente Olsrd en la maquina que queremos conectar, para ello descargamos el paquete y lo compilamos a mano:BR
bajamos la version del CVS:
cvs -d:pserver:anonymous@olsrd.cvs.sourceforge.net:/cvsroot/olsrd login cvs -z3 -d:pserver:anonymous@olsrd.cvs.sourceforge.net:/cvsroot/olsrd co olsrd-current
Primero algunas dependencias:
aptitude install bison flex
luego entramos a la carpeta creada en el paso anterior y compilamos:
cd olsrd-current make make install
Por ultimo es necesario compilar las librerias necesarias para que corra el cliente:
cd lib/
el listado nos debe mostrar algo como:
ls arprefresh dot_draw httpinfo nameservice quagga txtinfo bmf dyn_gw Makefile pgraph secure CVS dyn_gw_plain mini powerinfo tas
Entramos a las a cada una de las carpetas y las compilamos a mano (yo unicamente lo hice con dyn_gw_plain, nameservice y txtinfo)
cd LIBRERIA make make install
olsrd.conf
El archivo de configuración se encuentra en /etc/olsrd.conf la manera rápida de configurar el cliente es copiando el archivo que esta en el router en la misma ubicación. A continuación pego el que use en la maquina donde probé esto:
DebugLevel 0
IpVersion 4
AllowNoInt yes
Pollrate 0.1
TcRedundancy 2
MprCoverage 7
LinkQualityFishEye 1
LinkQualityWinSize 100
LinkQualityDijkstraLimit 0 9.0
LoadPlugin "olsrd_nameservice.so.0.3"
{
PlParam "name" "chapimovil"
PlParam "hosts-file" "/var/run/hosts"
PlParam "suffix" ".olsr"
}
LoadPlugin "olsrd_txtinfo.so.0.1"
{
PlParam "Accept" "127.0.0.1"
}
IpcConnect
{
MaxConnections 1
Host 127.0.0.1
}
LinkQualityLevel 2
UseHysteresis no
Interface "eth0"
{
HelloInterval 6.0
HelloValidityTime 108.0
TcInterval 4.0
TcValidityTime 324.0
MidInterval 18.0
MidValidityTime 324.0
HnaInterval 18.0
HnaValidityTime 108.0
}
# Add your addons (e.g. plugins) to olsrd.conf here,
# addons for interfaces in /etc/local.olsrd.conf.eth1
En el router
Pego explicación de sparkid a una pregunta sobre el tema en la lista de correo:
bueno resulta ke para ke el server este ne la lan como un nodo se necesita ke la lan este también en el segmento de red de la inalambrica wifi : 10.0.0.10 netmask 255.255.0.0 olsrd dhcp 10.0.0.10/28,255.255.0.0 lan: 10.0.0.11 netmask 255.255.0.0 Deshabilitar NAT: chulito Deshabilitar Firewall: chulito Número de Usuarios DHCP: 0 -> para desabilitar el dhcp por lan
Lanzar olsr
Para lanzar el programa basta con digitar en una consola como root:
olsrd
Pero para verificar que todo esta funcionando correctamente lo podemos lanzar en modo debug con:
olsrd -d 2
y esta es la salida que tira:
*** olsr.org - 0.5.4pre ***
Build date: Aug 21 2007
http://www.olsr.org
Parsing file: "/etc/olsrd.conf"
*** olsrd configuration ***
Debug Level : 2
IpVersion : 4
No interfaces : ALLOWED
TOS : 0x10
Willingness : AUTO
IPC connections : 1
Host 127.0.0.1
Pollrate : 0.10
NIC ChangPollrate: 2.50
TC redundancy : 2
MPR coverage : 7
LQ level : 2
LQ fish eye : 1
LQ Dijkstra limit: 0, 9.00
LQ window size : 100
Clear screen : no
Interfaces:
dev: "eth0"
IPv4 broadcast : AUTO
IPv6 addrtype : global
IPv6 multicast site/glbl : ff05::15/ff0e::1
HELLO emission/validity : 6.00/108.00
TC emission/validity : 4.00/324.00
MID emission/validity : 18.00/324.00
HNA emission/validity : 18.00/108.00
Autodetetc changes : yes
Plugins:
Name: "olsrd_txtinfo.so.0.1"
Name: "olsrd_nameservice.so.0.3"
Not using hysteresis
Could not read APM info - setting default willingness(3)
Using IP version 4
Added 0.0.0.0 to IP deny set
Added 127.0.0.1 to IP deny set
---- Interface configuration ----
Checking eth0:
Not a wireless interface
Metric: 0
MTU - IPhdr: 1472
Index 2
Address:10.10.0.83
Netmask:255.255.0.0
Broadcast address:10.10.255.255
Adding OLSR socket entry 5
New main address: 10.10.0.83
Adding OLSR socket entry 6
---------- LOADING LIBRARY olsrd_txtinfo.so.0.1 ----------
OLSRD txtinfo plugin 0.1 by Lorenz Schori
Checking plugin interface version: 5 - OK
Trying to fetch plugin init function: OK
Trying to fetch parameter table and it's size...
Sending parameters...
"Accept"/"127.0.0.1"... Got IP address 127.0.0.1
Accept: OK
Running plugin_init function...
Adding OLSR socket entry 7
(TXTINFO) listening on port 2006
---------- LIBRARY olsrd_txtinfo.so.0.1 LOADED ----------
---------- LOADING LIBRARY olsrd_nameservice.so.0.3 ----------
OLSRD nameservice plugin 0.3
Checking plugin interface version: 4 - OK
WARNING: YOU ARE USING AN OLD DEPRECATED PLUGIN INTERFACE!
DETECTED VERSION 4 AND THE CURRENT VERSION IS 5
PLEASE UPGRADE YOUR PLUGIN!
WILL CONTINUE IN 5 SECONDS...
Trying to fetch plugin init function: OK
Trying to fetch parameter table and it's size...
Trying to fetch param function: OK
Sending parameters...
"suffix"/".olsr"... Registering parameter "suffix":
NAME PLUGIN: parameter suffix: .olsr
OK
"hosts-file"/"/var/run/hosts"... Registering parameter "hosts-file":
NAME PLUGIN: parameter filename: /var/run/hosts
OK
"name"/"chapimovil"... Registering parameter "name":
NAME PLUGIN: parameter name: chapimovil (main address)OK
Running plugin_init function...
NAME PLUGIN: insert main addr for name chapimovil
NAME PLUGIN: validate parameter chapimovil (10.10.0.83) -> OK
---------- LIBRARY olsrd_nameservice.so.0.3 LOADED ----------
-- ALL PLUGINS LOADED! --
Main address: 10.10.0.83
Scheduler started - polling every 0.10 seconds
Received TC from NON SYM neighbor 10.10.0.82
NAME PLUGIN: writing hosts file
NAME PLUGIN: writing services file
NAME PLUGIN: writing latlon file
|
--- 17:53:11.69 ------------------------------------------------- DIJKSTRA
10.10.0.83 no next-hop
--- 17:53:11.69 ---------------------------------------------------- LINKS
IP address hyst LQ lost total NLQ ETX
--- 17:53:11.69 ------------------------------------------------ NEIGHBORS
IP address LQ NLQ SYM MPR MPRS will
--- 17:53:11.02694801 ----------------------- TWO-HOP NEIGHBORS
IP addr (2-hop) IP addr (1-hop) TLQ
--- 17:53:11.69 ------------------------------------------------- TOPOLOGY
Source IP addr Dest IP addr LQ ILQ ETX
Received TC from NON SYM neighbor 10.10.0.82
Willingness for 10.10.0.81 changed from 0 to 3 - UPDATING
TC: adding entry 10.10.0.81
MID new: (10.10.0.81, 10.10.0.82)
Inserting alias 10.10.0.82 for 10.10.0.81
\
--- 17:53:20.43 ------------------------------------------------- DIJKSTRA
10.10.0.83 no next-hop
(ioctl)Adding route with metric 1 to 10.10.0.82/255.255.255.255 via 10.10.0.82/eth0.
(ioctl)Adding route with metric 1 to 10.10.0.81/255.255.255.255 via 10.10.0.82/eth0.
--- 17:53:20.43 ---------------------------------------------------- LINKS
IP address hyst LQ lost total NLQ ETX
10.10.0.82 0.000 0.571 0 4 0.976 1.79
--- 17:53:20.43 ------------------------------------------------ NEIGHBORS
IP address LQ NLQ SYM MPR MPRS will
10.10.0.81 0.571 0.976 YES NO NO 3
--- 17:53:20.02434497 ----------------------- TWO-HOP NEIGHBORS
IP addr (2-hop) IP addr (1-hop) TLQ
--- 17:53:20.43 ------------------------------------------------- TOPOLOGY
Source IP addr Dest IP addr LQ ILQ ETX
10.10.0.81 10.10.0.83 0.247 0.976 4.15
-
--- 17:53:29.86 ------------------------------------------------- DIJKSTRA
10.10.0.83 no next-hop
(ioctl)Adding route with metric 1 to 0.0.0.0/0.0.0.0 via 10.10.0.82/eth0.
--- 17:53:29.86 ---------------------------------------------------- LINKS
IP address hyst LQ lost total NLQ ETX
10.10.0.82 0.000 0.727 0 8 0.976 1.41
--- 17:53:29.86 ------------------------------------------------ NEIGHBORS
IP address LQ NLQ SYM MPR MPRS will
10.10.0.81 0.727 0.976 YES NO NO 3
--- 17:53:29.02866037 ----------------------- TWO-HOP NEIGHBORS
IP addr (2-hop) IP addr (1-hop) TLQ
Olsrd en Windows
Toda la información sobre el cliente olsrd para Windows se encuentra en OlsrdWin